**Products are sold online and in-store simultaneously. The stock quantity may not be updated in the online system in time. **
Maximum signal transfer. Minimum interference.
Whatever language you listen to music in, we know you prefer it as interferences free as possible. You need the Gemini3.0 dual-headed cable. In most mass-produced USB cables, the signal and power cables are normally compacted together. This means two things – poor conductivity and they are not protected from one another.
The Gemini3.0 cable carries the audio signal and power in two separate cables. This separates the delicate USB data signal from the USB power. No interference and sound quality remains unaffected.
Key Features
Exceptional design
Our iFi FINAL USB connectors provide impeccable end-to-end RF shielding, being machined entirely from solid, aircraft-grade aluminium. Plus gold-plated connections make for years of steadfast service.
The Power of RF3
Most standard USB cables do not address RF issues and are fitted with filters that work over too narrow a range and are only fitted at the ends of the cables, leaving the length of the cable to act as an antennae.
SuperSpeed
USB3.0’s ultra-speed bandwidth of 5.0Gbps offers an incredibly wide bandwidth, 10x that of USB2.0’s 480Mbps.
Two heads are better than one.
The power cable is heavier gauge than often found in standard USB cables. And signal and ground have their own respective geometry for optimal conductivity. There are dual-headed designs and then there is the Gemini3.0 dual headed design. Nothing comes close.
The golden touch
Most USB cables use moulded plastic covered connections that do not shield the high frequencies present in the USB data link. Noise radiates out. Very few make their own connectors and rely on off-the-shelf components. These often lack durability.
Our FINAL USB connectors provide impeccable end-to-end RF shielding. They are machined entirely from solid, aircraft-grade aluminium. Plus their gold-plated connections make for years of steadfast service.
Degrees of separation
The Gemini3.0 cable carries the audio signal and power in two separate cables. This separates the delicate USB data signal from the USB power. No interference and sound quality remains unaffected.
How do I use?
Connect the USB 'A' Audio connector to a USB port on the computer. Connect the USB 'A' power connector to a USB port on your computer. Finally, connect the USB 'B' connector to a the input of the USB DAC/Sound card/Interface card etc.
Tech Specifications (USB3 Data)
Construction
Minimum inductance parallel construction
Conductors
24 and 28AWG
Conductor material
Heavy OFHC continuous cast copper silver matrix
Insulation
HD Polyethylene
Shielding
Quadruple-shields
Impedance
90Ohms
AC spark insulation
1500V
Connectors
iFi ‘FINAL’ USB connectors
Insulation resistance
100Mohm
Tech Specifications (USB3 Power)
Construction
Minimum inductance parallel construction
Conductors
12AWG
Conductor material
Heavy OFHC continuous cast copper
Insulation
Linear Polyethelyne (LPE) insulation
Current Rating
30A
Lengths/Weights
0.7m / 150g (0.33 lbs)
1.5m / 170g (0.37 lbs)
Warranty period
12 months
