An extra-thick CFRP pipe with a thickness of 3mm, high-speed processing of the unnecessary vibration
The carbon fiber and multi-layer laminate, thermosetting epoxy resin. Molded into extra-thick CFRP pipe with a thickness of 3mm. And high-speed processing unwanted vibration in the high rigidity of carbon unique. Improvement of resolution · S / N ratio due to the electromagnetic wave shielding can be expected. In addition, "STB-CM" is, the load-bearing 500kg / number, the heat-resistant features and 120 ℃, the necessary and sufficient strength and durability. Also, as difficult to scratch to use the object, the inner and outer peripheral edge of the "STB-CM" end face is taper processing.
The built-in to the "STB-MSX", realizing the high-speed sound quality tune
"STB-CM" is included with the weight and the same dimensions (outside diameter 20mm, height 17mm) of record stabilizer "STB-MSX" in, it can be replaced with the accompanying weight. Recombine the included weight of the "STB-MS" to "STB-CM", or by a hybrid mounting accessory weight and the "STB-CM", it can change freely mass and sound quality trend of "STB-MSX". Overall, for every mounting number of STB-CM increases, it will be the high-speed sound quality tune sharp.
(The STB-HWX, can not be installed the STB-CM for the height of the weight is different.)
Multi-use applications, such as a cable stabilizer-insulator
Passed through, such as the cable and the RCA plug as a cable stabilizer, such as installed in the lower portion of the audio equipment and speakers as insulator, you can use the multi-use.
The cable stabilizer, may be used more in a single cable, you can best tune that suits the preference by adjusting the mounting number of STB-CM.
When you own a power cable, If passed, the "STB-CM" to the pre-cable, you can produce the original power cable that allows the damping of the cable portion effectively. (Cable diameter is required to be less than 14mm.)
The "the STB-the CM ', even vacant gaps between the cables and plugs, to secure the effect of the stabilizer. In addition, such as a combination of such damping tape and cushioning material to your liking, your own mastering of is infinite.
Four-pack (STB-CM-4) and six-pack (STB-CM-6) prepared
STB-CM is, because they offer a four-pack (STB-CM-4) and six-pack (STB-CM-6), you can Shop without waste in accordance with the necessary number.
Example 1: insulator → "STB-CM-6" in the three-point support for the two speakers
Example 2: insulator → "STB-CM-4" in four-point support to the CD player and amplifier
Example 3: RCA cable plug stabilizer → "STB-CM-4" of plug both ends of the (pair)
Example 4: RCA cable and plug both ends of the (pair), digital RCA cable 1 at both ends of the plug stabilizer → "STB-CM-6"STB-CM4 (4 pieces)
As a structural member of the self-made items, infinite possibilities depending on the idea
Use of the STB-CM is, not only to the stabilizer and insulator, has unlimited potential depending on the idea of the user. For example, as a structural member of the self-made items, substrate support, for use in parts holder, such as a condenser. Or by covering the volume knob, such as using the vibration damping of the sensitive volume parts to vibration, various applications is assumed.
State covered with the STB-CM to the condenser
Epoxy resin, which is a matrix component of the STB-CM is, instant adhesive, epoxy adhesive, such as rubber-based adhesive, because it can be glued by a commercially available adhesive, it is easy to be treated as a component for the craft.
Beauty of the STB-CM is blessed with excellent possibilities in decorative applications, not limited to audio, please try to find the mastering of you only in your idea.
Specification
Material: CFRP (carbon UD + carbon cloth)
Size: An outer diameter of φ20, inner diameter φ14, thickness 3, height 17 (pipe shape)
Mass: 4g
Withstand load: 500kg / Pieces
Heat-resistant: 120 ℃
Conductivity: In the outer periphery, Zhou Mu conductive. The end face is weakly conductive.
