Oyaide SRBN Banana Plug

Smooth-and-tight. "SRBN" The aim was the only characteristics of the material, was to complete this theme. Instead of mechanically fixed, essentially adopting the phosphor bronze in order to achieve a reliable sense of holding a minimum number of parts. Phosphor bronze from its excellent spring properties and electrical properties, and many are employed in contact also say the cornerstone of electrical products.

Upon planning the "SRBN", the most attention paid the portion located on the contact of the distal end portion. To ensure the contact area of ​​the utmost, the tip portion is divided into four placed cross slit, upon insertion is designed as slits into close contact. Also has ELEC likeness is also reflected in the tip diameter. "SRBN" has been designed to fully conform to the WBT Co. of speaker terminal. Create a sample ranging from standard value 3.8mm to a dozen in 30μ unit, most select a size and shape that it can be said that the "smooth-and-tight". Also repeated verification speaker terminal other than the ones supplied by WBT, Inc., and adapts to any terminal.

"SRBN" is also the junction of the cable, attention seems to ELEC has been made. Adaptation cable diameter is set to maximum 4mm (5.5sq). Partial to insert the cable is subjected to a tapered, it was to facilitate a more insertion into the line of the body. In addition, and it shows a commitment to screw to stop the cable. Connection method employs a dual screw clamp method.

For cable penetration with a diameter of 4mm, use a high-rigidity stainless steel screw with a diameter of 5mm. Thereby eliminating the gap between the body and the screw part, the cable and the body has achieved a fixed and reliable contact by means of two screws.

"SRBN" played a balance between usability and easy installation,'s the Extreme banana plug.

Design is on the extension of the function, the pair eating rare Naru beauty was born necessarily sexual. Design of "SRBN" has been inspired by the Swiss-made luxury watch "Breguet". Slip that has been engraved on the body is reminiscent of the guilloche that is used in the face of the clock. Also screw to stop the cable, again using the same technique as the clock's hands, is a blue steel in which the quenching in stainless steel. Of course, this technique is not from decorative approach, the mechanical strength is improved by quenching the screw, also contributes to further preventing oxidation.

That was created by the outstanding cutting precision "SRBN". By 8mm phosphor bronze round bar highly programmed CNC machining of, it has been subjected to cutting with a high degree of accuracy. Then shaving Dasa the body, mechanically is barreling then subjected to one one buffing by the hand of man. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled. Body further has a mirror finish After the thick silver-plated to direct, will be finished by rhodium-plated.

Mirror finish, and direct plating. Because it is simple it must be built precisely. Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed. Pride of "Made in Japan". "SRBN" is of a highly polished Japa over needs and craftsmanship of the testimony.