Oyaide SPSL Spade Lug

Usability full product as ELEC is not unparalleled. Because, ELEC is always in contact with the end-user through the sale, because there in the environment to incorporate easily customer needs. Of course, in "SPSL" their spirits are alive. Set in the cable adaptation Minimum outer diameter large conductor outer diameter of 4.0mm (5.5sq) also in the large-capacity speaker cable corresponds.

"SPSL" is also the junction of the cable, attention seems to ELEC has been made. Adaptation cable diameter is set to maximum 4mm (5.5sq). Partial to insert the cable is subjected to a tapered, it was to facilitate a more insertion into the line of the body. In addition, and it shows a commitment to screw to stop the cable. Connection method employs a dual screw clamp method. For cable penetration with a diameter of 4mm, use a high-rigidity stainless steel screw with a diameter of 5mm. Thereby eliminating the gap between the body and the screw part, the cable and the body has achieved a fixed and reliable contact by means of two screws.

"SPSL" played a balance between usability and easy installation,'s the Extreme banana plug.

Design is on the extension of the function, the pair eating rare Naru beauty was born necessarily sexual. Design of "SPSL" is inspired from "SRBN" Similarly, Swiss-made luxury watch "Breguet". Slip that has been engraved on the body is reminiscent of the guilloche that is used in the face of the clock. Also screw to stop the cable, again using the same technique as the clock's hands, is a blue steel in which the quenching in stainless steel. Of course, this technique is not from decorative approach, the mechanical strength is improved by quenching the screw, also contributes to further preventing oxidation.

First, the underlying material does not contain lead and iron, adopted domestically brass of RoHS compliant. The rolling process the leading edge from the state of a round bar with a diameter of 15mm, punching, bending processing is done by SPYL dedicated mold. Furthermore OYAIDE ness Ukagaemasu also to its shape. Tip insertion part, has taken a two-stage shape of 6mm · 8mm to fit a wide range of speaker terminal. Adaptation maximum cable diameter is set to 5.5sq, is spot facing processing the cable junction diameter 4mm by NCN machining, shape to be a base of SPSL is completed.

In order to further take the stress distortion due to machining from here, it will be subjected to a heat treatment over time by low temperature furnace. Body which is heat treated, after being mechanically barrel polishing and subjected to a single one buffing by the hand of man. Example in which the polishing process was applied as for audio over these 2 degrees is not unparalleled. In addition mirror-finished body is finished beautifully by originality plating. First layer plating is, has been finished by sterling silver, which boasts the highest conductivity among the precious metals. The second layer luxury adopted the most expensive platinum among precious metals.

Mirror finish, and direct plating. Because it is simple it must be built precisely.Here too, and the philosophy of Oyaide electricity, I craftsmanship it has been condensed. Pride of "Made in Japan". "SPSL" is of a highly polished Japa over needs and craftsmanship of the testimony.