Oyaide ACROSS 900 XX V2 XLR Cable

3E-twisted structure is at once set stranded conductor of concentric twisted array configuration, by arranging a different wire diameter of three types, densify the twisted wire array. It is possible to reduce the diameter of the conductor configuration, we will strive to improve the conductor characteristic values.Strand of different conductor diameters of this three are arranged in geometric, to minimize voids between the strands, it plays to improve the wire density.Furthermore along with the twisted wire outer diameter of the downsizing, maintaining a stable and high-precision outer diameter, is unprecedented conductor structure in the world cross-section of true circle after twisting. Thus, uniformly brought into close contact with insulation and conductor, homogenized by eliminating random thickness of the insulating material. Such as keep the distance between the shield always uniform, we are working to stabilize the electrical characteristics. By further densification of the center conductor, twisted outer diameter success also the cross-sectional area to be Upsizing intact (0.94Sq⇒1.0Sq). This conductor resistance decreases (19.5Ω / km⇒18.2Ω / km). It has achieved a further improvement of the transmission capacity in comparison with the first generation.

An air layer as a damper, while improving the high-frequency characteristics by reducing the electrostatic capacity, damping vibrations by its excellent stabilizer effect, adopted Oyaide electrical own cross insulating structure (CIS structure). The basic architecture, employs a coaxial layout in order to make the most of the CIS structure. CIS structure is, the center conductor supported by a point rather than a surface, to minimize the mutual interference between the center conductor and the outer. In addition, the air damper that has been laid out in the interior has been designed in a completely different idea until now. In the approach to conventional vibration, but was a structure that is attenuated by the compound vibrations were internally generated, in the "ACROSS 900 V2", rather than be absorbed by damping vibrations, is the approach of the ideas, such as to open the vibration. In addition, the CIS structure is not only the excellent stabilizer effect, has contributed significantly to the improvement of the electrical characteristics. Since it is provided an air layer between the shield, creating a highly effective to a significant reduction of the electrostatic capacitance. The insulating material that make up the CIS structure, using a high molecular polyolefin exhibits an extremely low value of the dielectric constant is 1/4 as compared with the PVC. These ingenious structure and material, "ACROSS 900 V2" is unrivaled agile response, we stress-free space representation stand out.

Adopts the audio-only halogen-free sheath of Oyaide electrical tradition in exterior sheath, chose Beluga color of refined and elegant finish (Caviar Black). And discomfort without matching to any audio system. Marking the "ACROSS900 V2" "102SSC" to sheath engraved, clearly the V2 model.

By CIS structure and precision conductor 102SSC, foundation of the dynamic performance was completed in agile. What you need in order to demonstrate the potential of this highly original cable to the maximum extent, it is an excellent terminal XLR connector. In order to maximize the potential of the current and all cut-and-try the XLR connectors available on the market "ACROSS 900 V2", has adopted a silver blade type made of the best switch Kraft.

Plug and cable is soldered at the acoustic-only lead-free silver solder "SS-47". Normal solder purity of the tin from the cost is 99.9% (3N) degree. "SS-47" further discharge the impurities increase the purity to the limit, adopt a high-purity tin that indeed 99.993% (4N) or more. Further improvement of the electric conductivity, are designed to prevent leaching of solder, was blended silver, copper. Moreover, the case of normal alloy solder, silver mixing ratio of is from 3 to 3.5 percent, but "SS-47" is an amazing unsparingly put the amount of 4.7%. In addition, 1.7% compounded the next in high conductivity copper of silver among metals. Conductivity by this compounding ratio is dramatically improved, it succeeded in setting the eutectic point 217 degrees. Of course, the blending ratio of these, it has not determined only by numerical data and workability. To hit the solder and the inscription for the audio, the sound quality is considered to be appropriate to the highest priority. I was born that "SS-47" of the many times that there is no hearing test a proto model of a variety of blending ratio.