Ortofon MC Quintet Bronze Cartridge

***Products are sold online and in-store simultaneously. The stock quantity may not be updated in the online system in time. ***

***Our team will contact you for confirmation.***

***Goods in stock will be handled and sent within 1-3 working days. Replenishment takes about 1-2 months.***

⬇️ MC Quintet File Download ⬇️

Userguide

Product Sheet

Features

The Quintet Bronze moves into the higher league of the Quintets.

The slim profile of its Nude Fine Line diamond stylus will track even the highest frequency information, making it a must for discerning listeners.

Additionally its larger footprint ensures reduced distortion and record wear.

The sound will be very evenhanded with respect to all aspects. Classical music will be reproduced with power and open space around each of the instruments.

The ST-7 transformer is a perfect match for the MC Quintet Bronze cartridge.

LH-4000 headshell is specially recommended for MC Quintet cartridges series. 

MC Quintet Bronze Technical data

Output voltage at 1000 Hz, 5cm/sec. - 0.3 mV

Channel balance at 1 kHz - < 1.2 dB

Channel separation at 1 kHz - > 23 dB

Channel separation at 15 kHz - > 15 dB

Frequency response 20-20.000 Hz - +/-1.5 dB

Tracking ability at 315Hz at recommended tracking force *) - 80 µm

Compliance, dynamic, lateral - 15 µm/mN

Stylus type - Nude Fine Line

Stylus tip radius - r/R 8/40 µm

Tracking force range - 2.1-2.5 g (21-25 mN)

Tracking force, recommended - 2.3 g (23 mN)

Tracking angle - 20°

Internal impedance, DC resistance - 5 Ohm

Recommended load impedance - > 20 Ohm

Cartridge body material - ABS/Aluminium

Coil wire material - Pure 4-nines copper

Cartridge colour - Bronze

Cartridge weight - 9 gram

*) Typical value

Compatibility with Rega brand TT/TA: 

REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge.

Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tone arm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and you're tonearm is ready to play.

3.2 - 4 mm spacers should be enough for Quintet cartridge.