**Products are sold online and in-store simultaneously. The stock quantity may not be updated in the online system in time. **
**Please contact our team for confirmation.**
**Goods in stock will be sent within 1-3 working days.**
Digitise your vinyl collection
Offering superb measured and sonic performance, NAD’s two simple solutions, the PP 4 Digital Phono/USB Preamplifier makes it easy to add phono to many of today’s stereo amplifiers and AV receivers that have either eliminated the phono input or included a low quality circuit for attaching your turntable. As part of NAD’s commitment to the environment, the PP 4 features a more efficient “green” power supply that reduces power consumption. The PP 4 goes one step further with a USB interface, shielded USB cable and recording level control which reduces noise and improves the analogue-to-digital conversion process. The PP 4’s Auto Power Down feature saves energy by automatically powering the PP 4 to OFF when not in use.
Our PP 4 Digital Phono/USB Preamplifier enables you to digitise your treasured vinyl collections to a PC or Mac. It features inputs for both MM (moving magnet) and MC (moving coil) types for a wide variety of phono cartridges, and there is a line input to allow for the transfer of cassette tapes. The PP 4 also includes VinylStudio Lite Software for ripping LPs and burning audio CDs. The PP 4 Phono-to-USB Preamp offers a complete hardware and software solution with exceptional flexibility to record from LP or tape.
PP 4 Vinyl Studio Lite
The PP 4 (or the older PP 3) comes with Mac and PC compatible version of AlpineSoft’s VinylStudio Lite ripping software is included with your new PP-4. With VinylStudio Lite you can:
Rip LPs into WAV files
Split Tracks
Burn CDs
Record Disks
Look up Song Titles
Handle File Management
To download your FREE copy of VinylStudio Lite for your PP4 please click on the links below:
Vinyl Studio lite for Windows :
Here
Vinyl Studio lite MAC (OS X 10.11 and later):
Here
To upgrade to the fully featured version of VinylStudio, please visit AlpineSoft’s own
website and purchase the most intuitive software available for ripping LPs and burning CDs. VinylStudio’s powerful audio cleanup tools (you can trial these in VinylStudio Lite) can be used to remove clicks and pops restoring your songs to like new condition.
Visit: www.alpinesoft.co.uk/ for complete information
MC
Input Impedance (R and C)
100 Ohm + 180pF
Gain at 1kHz
58dB
Input sensitivity (ref. 200mV output)
0.38mV
Signal to noise (A weighted, with cartridge connected)
78dB
Input overload (20Hz/1kHz/20kHz)
0.65/6.5/60mV
Rated Distortion (THD 20Hz – 20kHz)
<0.03%
RIAA response accuracy
±0.3dB
Infrasonic filter
-14dB (5Hz)
-3dB (10Hz)
Digital output (USB)
16 bit linear PCM
Sampling frequency
48kHz
Dynamic range
86dB
MM
Input Impedance (R and C)
47 kilohm + 200pF
Gain at 1kHz
35dB
Input sensitivity (ref. 200mV output)
5mV
Signal to noise (A weighted, with cartridge connected)
76dB
Input overload (20Hz/1kHz/20kHz)
10/100/900mV
Rated Distortion (THD 20Hz – 20kHz)
<0.03%
RIAA response accuracy
±0.3dB
Infrasonic filter
-14dB (5Hz)
-3dB (10Hz)
Digital output (USB)
16 bit linear PCM
Sampling Frequency
48kHz
Dynamic range
89dB
Record Level
0dB to -6dB
Gross Dimensions excl. Power supply (W x H x D)*
135 x 49 x 72mm
5 5/16 x 1 15/16 x 2 7/8″**
*Gross dimensions include feet, extended buttons and rear panel terminals.
**Non-metric measurements are approximate.
Line In
Input Impedance
47 kilohm + 180pF
Rated Distortion (THD 20Hz – 20kHz)
<0.008%
Signal to noise, A weighted
-115dB
Maximum Input Level
5.3V
Line Out
Output Impedance
100 Ohm
Maximum Output Level
5.3V
