***Products are sold online and in-store simultaneously. The stock quantity may not be updated in the online system in time. ***
***Our team will contact you for confirmation.***
***Goods in stock will be handled and sent within 1-3 working days. Replenishment takes about 2-4 weeks.***
⬇️ Download ⬇️
Product Design Overview
Hybrid Power System
Linear/switching hybrid design to get the advantages from both techniques - low ripple and noise as well as fast transient response and high efficiency.
Sweet Spot Tuning (SST)
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
Distinct user levels
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous output voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
4T Sensing Design (4TSD)
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal - special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
Extremely safe to use
Automatic Transformer Voltage Adjust(ATVA), Electronic Output Voltage Polarity Switch and over voltage, current limit and short protection. Settings lock to prevent accidental change of the parameters.
Detailed and revealing yet unfatiguing sound
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
Advanced Automation
Compatibility with Apple TV remote,Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Specification
Power input
110-240Vac/50-60Hz (EU/US Version)
IEC C14 power inlet, a fuse holder with power on/off switch plus two-stage EMI filter for low impedance load
with better noise attenuation in low frequency applications
Mains cable
UK
DC OUT cable
5×2.5mm DC plug / 5×2.1mm DC plug
Custom cables made to order at additional cost
Output Voltage Range
5-30 [V]
Max Continuous Output Current (for V_out below 10V)
6 [A]
Max Continuous Output Current (for V_out higher than 10V)
l_out= 60[W] / DCout[V]
Max Continuous Output Power (for V_out below 10V)
P_out = V_out[V] * 6[A]
Max Continuous Output Power (for V_out higher than 10V)
60W
Dimensions (without knob, feet and connectors) (W x D x H , mm / inches)
217.5 x 206.5 x 50.0 / 8.6 x 8.1 x 2.0
Net weight (kg / lb)
~ 2,8 / ~ 6.2
Primary winding fuse
IEC 5x20mm fuse, 2AT, 250V
Secondary winding fuse
Littelfuse 154004T, 4A
Power consumption (idle)
TBD
