**Products are sold online and in-store simultaneously. The stock quantity may not be updated in the online system in time. **
**Please contact our team for confirmation.**
**Goods in stock will be sent within 1-3 working days.**
An elegant, top-of-the-line, BluOSTM- capable integrated amplifier with a host of features that offer maximum flexibility, excellent efficiency, and reduced noise and distortion. Also includes a phono input and a headphone output to accommodate music lovers of all kinds.
MODULAR AND CUSTOMISABLE
Using a proprietary modular design, you can upgrade or expand your M32 as technologies
emerge, ensuring a cost-effective way to keep the music “on” into the future.
YOUR MUSIC ANYWHERE
With the optional MDC BluOS module, you can centralise your digital music libraries and streaming services, and control playback from your smartphone or tablet. Network any BluOS-enabled product together through your home Wi-Fi connection to create multi-room music experiences.
ADVANCED AMPLIFICATION TECHNOLOGY
Advanced software-controlled algorithms result in the shortest signal path from source to speaker to produce virtually no distortion and a damping factor of over 1,000. This technology is among the fastest and most accurate amplification and error correction available.
FEATURES & DETAILS
DirectDigitalTM amplification, combining all preamplification and power amplification functions into a single amplifying stage
Four MDC slots with three for customisation and expandability, all are 24/192 capable
MM Phono Input
Single-ended Line Inputs
Asynchronous USB 2.0 (24/192) Computer Input
AES/EBU,Coax,andOptical24/192Inputs u Subwoofer X-over with selectable
Crossover Frequency and Levels
Headphone Amplifier
Two sets of Speaker Outputs for Bi-wiring u Remote Control HTRM-2
Specifications
GENERAL SPECIFICATIONS
Line In, Speaker Out
Continuous Output Power into 8 Ohm and 4 Ohm: 180W (ref. 20Hz - 20kHz at rated THD, both channels driven)
THD (20Hz - 20kHz): 0.005% (250mW to 180W, 8 Ohm and 4 Ohm)
Signal/Noise Ratio: >92dB (A-weighted, 500mV input, ref. 1W out in 8 ohms)
Clipping Power: >195W (at 1kHz, 0.1% THD)
IHF Dynamic Power: 8 Ohm 220W / 4 Ohm 360W / 2 Ohm 400W
Peak Output Current: >30A (in 1 Ohm, 1ms)
Damping Factor: >160 (ref. 8 Ohms, 20Hz to 6.5kHz)
Frequency Response: ±0.3dB (ref. 20Hz-96kHz at 192kHz)
Supports bit rate/sample rate: up to 24 bit/192kHz
Standby Power: <0.5W
Idle Power: 40W
DIGITAL INPUT (COAXIAL, OPTICAL, AES/EBU)
Input: Coaxial, Optical, AES/EBU
PREAMPLIFIER SPECIFICATIONS
Line Input, Pre Out
Input Impedance (R and C): 10kohms + 100pF
Maximum Input Signal: >4Vrms (ref. 0.1% THD)
Output Impedance: 240 Ohms
Input Sensitivity: 146mV (ref. 500mV out, Volume Maximum)
Maximum Voltage Output -IHF load: >2V (ref. 0.1% THD)
Tone Controls: Treble: ±10dB at 20kHz / Bass: ±10dB at 60Hz / Balance: -10dB
Phono Input, Pre Out
Input Sensitivity: 2.38mV (ref. 500mV out, Volume Maximum)
Maximum Input Signal 1 1kHz: >66mV rms (ref. 0.1% THD)
Line Input, Headphone Out
Output Impedance: 0.5 Ohm
DIMENSIONS AND WEIGHT
Dimensions: 435 x 133 x 396 mm (17 1/8 x 5 1/4 x 15 5/8”)**
Net Weight: 9.8kg (21.6lb)
Shipping Weight: 18.5kg (40.8 lb)
* Gross dimensions include feet, extended buttons and rear panel terminals. ** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers, cabinet makers, or other end users based on information contained in this document. Note: Installers should allow a minimum clearance of 55mm for wire/cable management.
